Change font size
It is currently Wed May 22, 2024 10:19 am


Post a new topicPost a reply Page 1 of 1   [ 12 posts ]
  Previous topic | Next topic 
Author Message
JordanRules
 Post subject: Bilsteins for a 7 series, work out a deal thingy
PostPosted: Wed Mar 22, 2006 10:26 pm 
Hiring a japanese chess champion as ECU

Joined: Wed Mar 15, 2006 8:28 pm
Posts: 487
Alright, I'm going coil overs, and I want koni adjustables. So that means I want to get rid of my Bilsteins. They have about 30-50K miles on them. A few years old (my car sits alot). I bought them from Ben (weezilusa) last spring. They are way stiffer than the Tokico's I tested them up against

at the time they were not leaking and went up and down smoothly....

So what I'd like to do, is I want to order up the Koni's, and have someone ready to buy these guys. If you want my chopped springs you can have them also...... I'd post a pic but I'm an idiot and don't know how....?

I probably won't order the Koni's for a month (gotta wiat for the coil overs also) and then I'll be ready to get rid of them.... I don't know, maybe you want to revalve your billys or somthing.... I was thinking around 250US for them since they seem to sell o nTB for around 300.

Anyways, let me know...

Jordan

PS get to work on your wilwood brake kit dale and matt and Ian, I want I want!
Top
 Profile  
 
Pa231
 Post subject:
PostPosted: Wed Mar 22, 2006 11:03 pm 
747 Jet engine being stuffed into trunk
User avatar

Joined: Mon Jan 23, 2006 6:06 pm
Posts: 796
Location: Cochrane, AB
Just put your pics on imageshack or photobucket.

I might be interested.
Top
 Profile  
 
Tha VZA
 Post subject:
PostPosted: Wed Mar 22, 2006 11:17 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Dec 21, 2005 8:34 pm
Posts: 1834
Location: It varies...
^^^or our own gallery!!!!

ciao

_________________
VOLVO - not just a car, it's an addiction.
Image

Top
 Profile  
 
RaZ
 Post subject:
PostPosted: Thu Mar 23, 2006 12:21 am 
Site Admin
User avatar

Joined: Wed Dec 21, 2005 4:01 pm
Posts: 2005
Location: Always in front of a computer or behind a wheel
yes, everyone who uses this forum can just set up their own gallery account (www.calgaryvolvoclub.com/gallery) - free hosting for all your pictures/movies!

- Rasmus
Top
 Profile  
 
JordanRules
 Post subject:
PostPosted: Thu Mar 23, 2006 7:29 pm 
Hiring a japanese chess champion as ECU

Joined: Wed Mar 15, 2006 8:28 pm
Posts: 487
Sweet just set it up... Does it allow hot linking to like turbobricks or even in here?

You can get an idea how the car sits in those pictures....

Jordan
Top
 Profile  
 
RaZ
 Post subject:
PostPosted: Thu Mar 23, 2006 9:25 pm 
Site Admin
User avatar

Joined: Wed Dec 21, 2005 4:01 pm
Posts: 2005
Location: Always in front of a computer or behind a wheel
JordanRules wrote:
Sweet just set it up... Does it allow hot linking to like turbobricks or even in here?


hot linking no problem, just go right click properties on the picture and go
Code:
[img]http://blkasdlkjnasdlkjabsdlkjasd/lkjasd.jpg[/img]
[/code]
Top
 Profile  
 
Roj
 Post subject: Re: Bilsteins for a 7 series, work out a deal thingy
PostPosted: Wed Mar 29, 2006 8:53 pm 
I can take anything apart.
User avatar

Joined: Tue Jan 10, 2006 2:54 pm
Posts: 379
Location: Calgary
JordanRules wrote:
Alright, I'm going coil overs, and I want koni adjustables. So that means I want to get rid of my Bilsteins. They have about 30-50K miles on them. A few years old (my car sits alot). I bought them from Ben (weezilusa) last spring. They are way stiffer than the Tokico's I tested them up against

at the time they were not leaking and went up and down smoothly....

So what I'd like to do, is I want to order up the Koni's, and have someone ready to buy these guys. If you want my chopped springs you can have them also...... I'd post a pic but I'm an idiot and don't know how....?

I probably won't order the Koni's for a month (gotta wiat for the coil overs also) and then I'll be ready to get rid of them.... I don't know, maybe you want to revalve your billys or somthing.... I was thinking around 250US for them since they seem to sell o nTB for around 300.

Anyways, let me know...

Jordan



Jordan,

Did you get rid of those shocks and springs yet ? I may be interested. Would work in my 940, no ?

Roj

_________________
<|><|><|><|><|><|><|><|><|><|><|><|>
<|>
<|> Resistance is Futile
<|> You WILL be Assimilated
<|> Notwithstanding that, have a nice day. :)
<|>
<|><|><|><|><|><|><|><|><|><|><|><|>

Top
 Profile  
 
JordanRules
 Post subject:
PostPosted: Mon Apr 03, 2006 8:52 pm 
Hiring a japanese chess champion as ECU

Joined: Wed Mar 15, 2006 8:28 pm
Posts: 487
No I didn't.

I'm not 100% sure what I'm going to do yet. I had a set amount for the car, and I need to replace my tranny (getrag) and it looks like going with a T5 will be cheaper. So I might not go through with this until later in the summer.

I'll post back when I do what I'm gonna do.

Although, Hmmmmmmmm Give me a few weeks.

Jordan
Top
 Profile  
 
Roj
 Post subject:
PostPosted: Wed Apr 05, 2006 10:59 pm 
I can take anything apart.
User avatar

Joined: Tue Jan 10, 2006 2:54 pm
Posts: 379
Location: Calgary
Ok, Jordan. Keep me posted and let me know what you decide. I won't have the 940 for a while longer yet so I don't need to know immediately.

That being said, I'm thinking about throwing in some IPD sways and performance springs while I'm down in Washington picking up my 940T so it would be handy if I knew whether or not I'll be able to buy your springs before I go down there... Would that be possible ? What kind of money would you be asking for the springs & shox if you do decide to sell them ?

Roj

_________________
<|><|><|><|><|><|><|><|><|><|><|><|>
<|>
<|> Resistance is Futile
<|> You WILL be Assimilated
<|> Notwithstanding that, have a nice day. :)
<|>
<|><|><|><|><|><|><|><|><|><|><|><|>

Top
 Profile  
 
JordanRules
 Post subject:
PostPosted: Sun Apr 09, 2006 2:05 pm 
Hiring a japanese chess champion as ECU

Joined: Wed Mar 15, 2006 8:28 pm
Posts: 487
I'd like 275 for the shocks. And the springs will be free. The springs are just cut 960 wagon stuffs. So nothing fancy. I'd get some Eurosport tuning springs personally.

I need to figure out my transmission asap, thats sort of what is holding me back right now.

Jordan
Top
 Profile  
 
Roj
 Post subject:
PostPosted: Thu Apr 20, 2006 2:29 pm 
I can take anything apart.
User avatar

Joined: Tue Jan 10, 2006 2:54 pm
Posts: 379
Location: Calgary
Jordan,

Have you made up your mind on the shocks yet ? I've got a line on a set of brand new unused Bilstein HD shox and IPD sport springs for 700/900 from a guy down in the USA that I'm thinking of putting an offer on. It seems he bought them to put into a car he was building and never managed to find the time to do it. Could probably get them for 1/2 to 2/3 the cost of getting them new from IPD.

So let me know ASAP if you still want to sell those shox otherwise I'll probably put an offer in on that stuff in the USA and see whether or not he takes it.

Thanks,

Roj

_________________
<|><|><|><|><|><|><|><|><|><|><|><|>
<|>
<|> Resistance is Futile
<|> You WILL be Assimilated
<|> Notwithstanding that, have a nice day. :)
<|>
<|><|><|><|><|><|><|><|><|><|><|><|>

Top
 Profile  
 
JordanRules
 Post subject:
PostPosted: Thu Apr 20, 2006 5:59 pm 
Hiring a japanese chess champion as ECU

Joined: Wed Mar 15, 2006 8:28 pm
Posts: 487
Sorry, I think I won't be selling them any time soon. A cheap 850 popped up at work that I'm going to put some money into instead for the time being. Once I sell it off though, I'll put them up. No worries

Jordan
Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 12 posts ]


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net