Change font size


Post a new topicPost a reply Page 1 of 1   [ 15 posts ]
Author Message
 Post subject: Smaller "Stock" Wheel Finished
PostPosted: Sun Feb 03, 2008 11:04 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Jun 14, 2006 4:19 pm
Posts: 3131
Location: Lethbridge, AB
Hey Guys,

It's been too damn cold to be out in the garage for very long...so I figured I'd get my steering wheel project finished. It had been sitting on the back-burner since May - I've been busy.

Just to recap - the idea was to cut down the 17" stock steering wheel and make one a little less bus like. Here's the start point.

Image

I ended up having to do a segmented wheel as I couldn't get the mahogany to bend nicely (I could have steamed it, but I'm lazy). I went with a segmented wheel - with all parts being cut sequentially it minimizes the look of the segments (damn, that makes no sense, but you'll see). I decided to go with an inlay of Bloodwood - it matches my red interior and is hard as hell and very pretty.

Here's the shots of putting the wood on the metal rim - West System Epoxy was used to glue everything.

Image

Clamps - I need more clamps.

Image

What was I saying about the clamps?

Image

Here it is with the plastic repaired and the mahogany toned to a better colour.

Image

I carved a thumb groove to make it a very comfy wheel.

Image

Here's the detail shot...still needs to be clear coated, but I think it's coming along nicely. The horn push that I have in the car right now will replace this ratty one - it was just for test fitting things. Not bad for a $10 eBay wheel and about two weekends and a few weeknights.

Image

Craig

_________________
Coburn Performance - OCD comes naturally.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 03, 2008 11:28 pm 
granny_star
User avatar

Joined: Fri Jun 22, 2007 10:12 pm
Posts: 1601
Location: Calgary
I HATE YOU TELUS!!!!!!

now to retype what i typed before...

oooh....pretty....

but I think you need more clamps. ;)

_________________
Christine....the 98 s70 t5 -466k km...she's sold
The Derp...83k km of gas sipping glory! 2012 Mazda 3 sport mt - about to be sold.
The Nameless 98 v70 t5...waiting for me in Cali


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 8:07 am 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Dec 21, 2005 8:40 pm
Posts: 3492
Location: Calgary, Ab
Excellent work, as usual. And CLAMPS!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 8:11 am 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Dec 21, 2005 4:32 pm
Posts: 1927
Location: Didn't learn, now renovating bathroom #2, and you think cars are expensive!!!
Beautiful work Craig :supz:

_________________
Volvord Image
1989 744TI Ford 302, Wilwood Brakes, 5 speed


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 9:48 am 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Dec 21, 2005 7:14 pm
Posts: 1875
Location: Missing my garage in Sunnyside
now do that on the outside of the car and make a woody!

_________________
Hi, I drive a fictional star wars character with rear wheel drive. His name is Darth Wagon, he has a shiny helmet.
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 10:02 am 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Jun 14, 2006 4:19 pm
Posts: 3131
Location: Lethbridge, AB
swedishmeatballrocket wrote:
now do that on the outside of the car and make a woody!


I've never been a huge fan of woodies - sort of a weird car concept, but every bit as biodegradable as metal.

_________________
Coburn Performance - OCD comes naturally.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 1:10 pm 
granny_star
User avatar

Joined: Fri Jun 22, 2007 10:12 pm
Posts: 1601
Location: Calgary
...please don't turn your car into a beaver wagon.

beaver wagons make baby jesus cry.

_________________
Christine....the 98 s70 t5 -466k km...she's sold
The Derp...83k km of gas sipping glory! 2012 Mazda 3 sport mt - about to be sold.
The Nameless 98 v70 t5...waiting for me in Cali


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 1:48 pm 
Grime Killer!
User avatar

Joined: Tue Jan 31, 2006 1:17 pm
Posts: 104
Location: Calgary Canada
nice job! any other wood trim going on in there?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 1:53 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Jun 14, 2006 4:19 pm
Posts: 3131
Location: Lethbridge, AB
Yup, I did a shift knob (or I refinished one that I got from the Princess and made a new indicator plate for), it doesn't need anymore wood. I'm hoping the automotive clear works well and it should stand up to the elements.

_________________
Coburn Performance - OCD comes naturally.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 2:48 pm 
Site Admin
User avatar

Joined: Wed Dec 21, 2005 4:01 pm
Posts: 2005
Location: Always in front of a computer or behind a wheel
Image

I lol'd


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 3:53 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Dec 21, 2005 8:40 pm
Posts: 3492
Location: Calgary, Ab
That's who I was thinking of, Raz.

Clamps clamps CLAMPS!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 5:01 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Jun 14, 2006 4:19 pm
Posts: 3131
Location: Lethbridge, AB
Futurama reference? If not I'll have to start watching more TV.

_________________
Coburn Performance - OCD comes naturally.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 04, 2008 6:07 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Thu Dec 29, 2005 12:29 am
Posts: 1790
Location: Eating tofu and legumes in my hippie shack
That wheel is gonna look slick in that car. Damn slick.

_________________
Image


Top
 Profile  
 
 Post subject: Wheel Gets Clear
PostPosted: Sun Feb 10, 2008 10:35 pm 
Haha, I just built a W24 Octo-Turbo, now what?!
User avatar

Joined: Wed Jun 14, 2006 4:19 pm
Posts: 3131
Location: Lethbridge, AB
Be careful...clear coating your wood steering wheel increases the colour and "pop" of the wheel. Here's the last instalment of the wheel build until I get it bolted in the car at least. Another well spent afternoon in Greg's paint booth...I mean garage the the new wheel and shift knob have a new finish. It's a 2-part polyurethane clear that came out of a rattle can. It's every bit as toxic and hard as normal car paint, but quite a bit less expensive ($25 per can). I only needed a single can to get the parts coated.

Five coats of clear were applied to the wheel (including the black centre part) and 4 went on the shift ball. After it dried up (overnight) I had a little wet sanding to do (starting at 400 and ending up at 2000 grit) as the finish settled into the grain of the wood and there were a few mishaps. You'd think I'd be better at the wheel painting gig after the GT wheel, but clear out of a can is tricky. It sanded great and polished up like a new dime. It takes quite a bit to polish the poly as it is so hard, but the results speak for themselves. Smooth as glass.

Here are the shots.

From the side.
Image

Aerial shot.
Image

This shot shows off the Bloodwood to best effect.
Image

Here's the shift knob. Bought at Princess Auto - I had the shift pattern done at an engraving shop on textured black plastic.

Image

Side view - not bad for $3 (and it is walnut - or the cheap Chinese knock off of walnut :D )

Image

_________________
Coburn Performance - OCD comes naturally.


Last edited by 122_Canuck on Sun Feb 10, 2008 11:12 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 10, 2008 10:48 pm 
granny_star
User avatar

Joined: Fri Jun 22, 2007 10:12 pm
Posts: 1601
Location: Calgary
ooooohhhhh....ahhhh....

very pretty :)

_________________
Christine....the 98 s70 t5 -466k km...she's sold
The Derp...83k km of gas sipping glory! 2012 Mazda 3 sport mt - about to be sold.
The Nameless 98 v70 t5...waiting for me in Cali


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 15 posts ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net