Haha, I just built a W24 Octo-Turbo, now what?! |
|
Joined: Wed Jun 14, 2006 4:19 pm Posts: 3131 Location: Lethbridge, AB
|
I've used regular single stage automotive urethane for years. It's hard, durable and engine temps don't get high enough to cause problems. Check out my pushrod engine building thread. Just epoxy prime and paint. You will need to prime it - check the open times for the epoxy. Most are over 24 hours. You can get any colour this way including RED - which is the most expensive paint you can buy.
_________________ Coburn Performance - OCD comes naturally.
|
|