Ugly Duck wrote:
E... I used Ian's fancy-shmancy Rona Brake Bleeder Kit (TM) and the pedal is as firm as I could want it.
Maybe you could build something up similar, just for your car? Rona weed sprayer -> surgical tubing -> all-metal screwed valve stem with core removed -> Honda MC reservoir cap
Design modification ... do not use surgical tubing!!!! Brake fluid has some effect on natural rubber, while bleeding my Wilwoods I checked the pressure bottle and it was almost empty (put a full liter in it and had not bled anywhere near that amount). Looked at the surgical tubing and it was swollen to about 3" in diameter over a 2' length (panic as I imagined the tubing blowing up spraying brake fluid all over the engine)
Needless to say the tube did hold out long enough for me to finish bleeding but it will be replaced with vinyl tubing before it gets used again