Yeah, I need an oil only center section with a usable .63 A/R exhaust housing. Preferably one that just blew oil, but didn't tear up the turbine wheel horribly, but I'll fish for what I can get. Missing /damaged compressor, missing parts, broken studs (up to a degree...if it can be repaired by a machine shop) etc aren't of any concern nor is the WG housing.

I thought I had one, and I did, but either adrian or RSI have both my .63 A/R donors and my only other is a watercooled . I very much dislike water cooling. I'd prefer it be 82 and newer with the gasketless mating arrangement, but an 81 with a traditional T3 flange is ok.


It is for my 245ti. Worst case scenerio I'll have to get creative extricating my .63 off my 60 trim and find a dry center on some early 740T POS.

I'll try to look through my stash tonight & see what I've got. Dale's got a .63 wet that's exactly what you described (wobbly, but not torn up), but I don't know how comfortable you are running the wet housing without water. I think I've got one dry housing, but it's a 50 trim that's still (barely) useable. Maybe we could combine them.