Hey all, anyone have an M46 hydraulic clutch fork they wouldn't mind shipping to sask?

Let me know!

-Sol

Those are rare like hens teeth...why not use the cable one?

Most 740s use hydraulic clutches, not TOO difficult to find.

I'm guessing he's got a 740 with a manual transmission. Not so rare but finding one not stuck to a bellhousing and mounted in a car might be a challenge.

well, the m46 i pulled out of the 740 wagon i had a cable clutch...i pulled the whole engine tranny, driveshaft etc. but before i knew it I had sold the shell of the car without pulling the pedals/cable clutch stuff.

I ended up getting pedals and all the fluid clutch parts needed for hydraulic conversion, but i just got the fork off to change the pivot and realized i'll need a different fork...

740 parts are somewhat rare around here, so i thought i'd put it out there

Those forks do tend to wear out at the pivot point, depending on your goals for the car it might be worthwhile to consider a new one.

Hmm, thanks for the tips!

Have you tried that guy down in vibank with all the volvo and other euro parts?

Yeah....Erik (rockmonton) and I both tried to get parts from that guy....kinda flaky.

I do have a line on parts tho, the guys at ReVolv in saskatoon apparently have a bucket o' clutch forks i can come have a look at.

-Sol

Hmmm, no dice at ReVolv

Still looking... anybody?

Try chapman motors in bc

Ended up biting the bullet and grabbing a new one from Chapman. Thanks everyone for your input!

Mods can delete this thread