In case some of you don't read TurboBricks...


Most of you know the story on how difficult it's been to get SuperPro stuff lately. Bottom line is Fulcrum Suspensions (SuperPro's parent company) decided to change North American distributors. The old distributor quit ordering new stock a few months ago and the new one just got a shipment in but no one is sure if there are any Volvo bushings in it. So...I've had many inquiries and have had to turn away many people simply because I could not get bushings. IPD and FCP are in the same boat.

But...there is a little light at the end of the tunnel. While I can't order anything new just yet, I've been able to purchase all the old stock from the old distributor at reduced prices. I expect the shipment to arrive any day now. Once it does, I'll have the following bushings available...

SPF1023K...Strut Bar to Lower Control Arm...740/760/940 series...$20 for a set (does both sides). My regular price on these has been $28.65.



SPF1024...Accessory Bushings for all series. I'm selling these individually. $4.00 each...Regular price on a package of 4 was $26.25 so you're saving over $2.50 a bushing.



SPF2092K...Upper Endlink bushings for 240 series although they're pretty universal. Selling in packages of 4. $7.50 for a set. Regular price was $11.25.





SPF0521-23K...240 series swaybar chassis bushing for 23mm front swaybar. Only one pair of these available...$7.50. Regular price was $11.75. No picture available but you know the part... I also just found a set for a 19mm swaybar in my drawer... 23mm bushing is sold

SPF0520K...Hourglass-style torque rod bushings for 240 series cars. Regular price is $39.99 for a set of 4. $30. One set only...



SPF1025-20K...7/9 series swaybar to chassis bushings for 20mm swaybars. I presume this is the stock bar. Regular price was $16. 3 sets available...$10 each. No image available but you know what they look like...

SPF1151-20K...850 series swaybar to chassis bushings for 20mm swaybars. $10 a set. 3 sets available.


These are all the bushings I have available at the moment so please don't email me asking if I have something else. I don't. I'm going to take a hit on shipping and say I'll ship for a flat $7.50 per order, no matter what you buy.

We're also getting a bunch of polyurethane rod of various thicknesses and hardnesses. Some of that might be available, depending on what we figure we can make with it. ogle:

PM me with your requests...

Thanks!


Stupid pictures don't work here...