There is a guy on T'Brick that sells milled aluminum plugs that look very nice but it seems he can't answer PMs in less than 3 days. I need a set for the 405 head on the B23Frankenstein that is going in the red 740....by the weekend, if possible. I'd like to drive this car out of the garage Sunday...

Whatcha got?

quarters or nickels (cant remember) + jb weld

Nope...need something that is somewhat reversible. That would be the TurboBricks way though...

So you're just looking for injectors to fill the holes....you don't need them to work perfect, correct? I've got wads of 'em if you want me to send them to you.

I need the injectors, the plastic sleeves and the metal clamp-down thingies. Don't need any lines. Don't care if the injectors work. There was (is?) a 240 turbo at Buck's. I'll stop in tomorrow to see if it's still there and if the injectors etc are still there.

The plastic sleeves in the 405 head were reamed out to accept a standard EFI injector and a modified fuel rail held them in place. I can't use the modified fuel rail and EFI injectors as the fuel rail doesn't fit with the B230 intake in place.

I guess the injectors and holders aren't still in your B21F+T, are they?

Nope...they must've gone out with the fuel distributor...wherever that went...

Sweet...the 240 Turbo at Buck's still had everything I needed...

Excellent.