Canadian Tire Bolt ons |
|
Joined: Sun Nov 07, 2010 4:21 pm Posts: 45 Location: Calgary
|
You're right. The pins/dowels on the flywheel are supposed to go through holes on the pressure plate. If you have the right parts the dowels should line up with holes in the pressure plate. The dowels tend to go close to the hold down bolts so try lining them up there first. If you can't get the pins to line up or into the holes there is a wrong part (or mismatched) somewhere for sure. You don't want to install without the dowels in place.
_________________ 2005 S60 2.5T is Da Bosses (she who must be obeyed) 2008 V70 3.2 is mine and the Banks--Party time not the Banks anymore!
|
|